Surface Preparation:

Thoroughly clean the vehicle's exterior to remove dirt, grease, and contaminants.

Sanding or stripping the existing paint to create a smooth surface for the new paint to adhere to.

Repair any dents, scratches, or imperfections on the surface through dent removal or bodywork.

Priming:

Apply a primer coat to enhance paint adhesion and corrosion resistance.

The primer also helps to fill minor imperfections and provides a smooth base for the paint.

Masking and Taping:

Cover areas of the vehicle that should not be painted, such as windows, trim, and other non-paintable parts, using masking tape and protective paper.

Paint Application:

Apply the base coat, which is the actual color of the vehicle. This is usually applied in several layers to achieve depth and an even color.

After the base coat, a clear coat is applied to protect the paint and give it a glossy finish. Multiple layers of clear coat might be applied to ensure durability and shine.

Drying and Curing:

Allow sufficient time for the paint to dry between coats as well as after the final clear coat application.

Some painting processes involve curing the paint in a controlled environment, such as a heated paint booth, to ensure proper adhesion and durability.

Buffing and Polishing:

After the paint has dried completely, the surface is buffed and polished to remove any imperfections, such as dust particles or minor irregularities, and to achieve a smooth, glossy finish.

Quality Inspection:

Conduct a thorough inspection to ensure the paint job meets quality standards.

Check for color match, consistency, smoothness, and overall finish.

Reassembly:

Once the paintwork is complete and thoroughly inspected, reassemble any parts that were removed or masked before painting.